People with sleeved block experience needed

johnny34
Impreza RS Driver
Posts: 143
Joined: Tue May 05, 2009 10:50 pm
Location: melbourne

People with sleeved block experience needed

Postby johnny34 » Tue Jul 18, 2017 3:38 pm

As tittle above need your experience with having sleeves.

JBonDSS
Impreza WRX Driver
Posts: 515
Joined: Sat Apr 24, 2010 5:13 pm

Re: People with sleeved block experience needed

Postby JBonDSS » Wed Jul 19, 2017 6:02 pm

there are a few different block designs around and therefore the performance in the different blocks will be different
what are you looking working with
Old school factory closed desk 2-2.2ltr
Open 2-2.5
Semi closed 2-2.5

Hell there might be someone thatll do after pay for a Willal Billet block

2011 -HH 61.79 Calder 1:09 Winton 1.43 Sandown 1.30 PI 1.58
2012 - Heathcote 13.4 Calder 1.22(wet failure) Sandown 1.25 PI 1.59
2013 - Winton 1.44(7psi) Sandown 1.25 PI1.49 Sandown 1.26

johnny34
Impreza RS Driver
Posts: 143
Joined: Tue May 05, 2009 10:50 pm
Location: melbourne

Re: People with sleeved block experience needed

Postby johnny34 » Wed Jul 19, 2017 6:52 pm

JBonDSS wrote:there are a few different block designs around and therefore the performance in the different blocks will be different
what are you looking working with
Old school factory closed desk 2-2.2ltr
Open 2-2.5
Semi closed 2-2.5

Hell there might be someone thatll do after pay for a Willal Billet block


Block is the thick bore linner from the jdm grb ej20

User avatar
blotto
S204 Driver
Posts: 5229
Joined: Tue Oct 14, 2003 6:38 pm
Location: Thread Hijacking on a forum near you

Re: People with sleeved block experience needed

Postby blotto » Thu Jul 20, 2017 10:49 am

Has anyone cracked a bore on those motors?
Veni Vidi Vici

Return to “Engine, Driveline, Exhausts and Turbos”

Who is online

Users browsing this forum: No registered users and 3 guests