2006 STI double dinn unit

User avatar
Impreza RS Driver
Posts: 165
Joined: Wed Jun 25, 2014 7:12 pm

2006 STI double dinn unit

Postby ABSTI » Fri Jun 27, 2014 4:02 pm

Hi all,

I'm currently looking at replacing the standing double DIN 2006 STI cd/stereo with a AVH-X3600DAB, I'm yet to purchase the unit. Is there anything I need to be mindful of when it comes to DIN/JIN sizes? I'm assuming that I'll need some sort of Subaru mount to fit?

Any opinions on the below?

http://www.pioneer.com.au/au/products/2 ... /page.html

Learner Driver
Posts: 27
Joined: Thu Jan 02, 2014 12:12 pm
Location: Melbourne, Doncaster

Re: 2006 STI double dinn unit

Postby DY555 » Thu Jul 24, 2014 3:06 pm

I recently replaced the standard 2 DIN head unit in my 2006 STi with this Kenwood 2 DIN unit - http://www.kenwood.com/au/car/receiver/dpx-u5130bt/

Fits perfectly with no extra mount required and easy to DIY.

Pretty sure 2 DIN is a standard size so should be the same across different brands.

User avatar
Impreza WRX Driver
Posts: 695
Joined: Sat Sep 21, 2013 10:52 am
Location: Bayswater

Re: 2006 STI double dinn unit

Postby Yeldz » Thu Jul 24, 2014 7:51 pm

It will fit perfectly
One tip, make sure you use the correct size phillips head screwdriver to remove the factory brackets.
Once the seal is cracked they come out easy, easy to destroy the screw though.

Grab the Aerpro audio harness's from Autobarn & it will be installed in no time ;)

User avatar
Learner Driver
Posts: 49
Joined: Thu Sep 26, 2013 7:19 pm
Location: S.E Suburbs

Re: 2006 STI double dinn unit

Postby PSI250 » Thu Jul 24, 2014 9:15 pm

Not that it matters that much. But my aerpro patch harness did require modifying as front and rear speakers were arse about.
I have a wiring diagram somewhere if it helps.

Return to “In Car Entertainment and Alarms”

Who is online

Users browsing this forum: No registered users and 4 guests