98 Subaru Impreza WRX Keypad not working

wiam_t
Learner Driver
Posts: 2
Joined: Sun May 08, 2016 2:50 pm

98 Subaru Impreza WRX Keypad not working

Postby wiam_t » Sun May 08, 2016 3:09 pm

Ok so heres the deal my 98 wrx has the key pad imboliser from Subaru installed, the key pad works you can enter the 4 digit code but after you enter it the check engine light doesn't come on and i cant start the car. i have no idea whats stopping me from starting it Please help sad i cant drive the car. :( :(

2DIE
Impreza RS Driver
Posts: 126
Joined: Tue Feb 25, 2014 10:47 pm

Re: 98 Subaru Impreza WRX Keypad not working

Postby 2DIE » Sun May 08, 2016 3:15 pm

There is 2 codes on my Brant alarm, one you only use after the alarm has gone off. Look up how to reset the Brant alarm, from memory it's something like remove the negative terminal and hold 0 on the pad.

Sent from my SM-N9005 using Tapatalk
Last edited by 2DIE on Sun May 08, 2016 3:26 pm, edited 1 time in total.

2DIE
Impreza RS Driver
Posts: 126
Joined: Tue Feb 25, 2014 10:47 pm

Re: 98 Subaru Impreza WRX Keypad not working

Postby 2DIE » Sun May 08, 2016 3:22 pm

Image

Found how to do it properly.

Sent from my SM-N9005 using Tapatalk

User avatar
Yeldz
Impreza WRX Driver
Posts: 695
Joined: Sat Sep 21, 2013 10:52 am
Location: Bayswater

Re: 98 Subaru Impreza WRX Keypad not working

Postby Yeldz » Sun May 08, 2016 3:42 pm

Check that you don't have low volts
All41N14All

Return to “In Car Entertainment and Alarms”

Who is online

Users browsing this forum: No registered users and 3 guests